Publicidad
Idiomas disponibles
Idiomas disponibles
operating. Before you start the machine,
make sure the cutter, line or blade is
not contacting anything. A moment of
inattention while operating the machine
may result in injury to yourself or others.
•
Do not operate the machine above waist
height. This helps prevent unintended
cutter or blade contact and enables better
control of the machine in unexpected
situations.
•
When cutting brush or saplings that are
under tension, be alert for spring back.
When the tension in the wood fibres is
released, the brush or sapling may strike
the operator and/or throw the machine out
of control.
•
Use extreme caution when cutting brush
and saplings. The slender material may
catch the blade and be whipped toward
you or pull you off balance.
•
Maintain control of the machine and do
not touch cutters, lines or blades and other
hazardous moving parts while they are still
in motion. This reduces the risk of injury
from moving parts.
•
When clearing jammed material or
servicing the machine, make sure all
power switches are off and the battery
pack is removed or the power cord is
disconnected. Unexpected starting of the
machine while clearing jammed material
or servicing may result in serious personal
injury.
•
Carry the machine with the machine
switched off and away from your body.
Proper handling of the machine will reduce
the likelihood of accidental contact with a
moving cutter, line or blade.
•
When transporting or storing the machine,
always fit the cover on metal blades.
Proper handling of the machine will reduce
the likelihood of accidental contact with the
blade.
•
Only use replacement cutters, lines,
cutting heads and blades specified by the
manufacturer. Incorrect replacement parts
may increase the risk of breakage and
injury.
Other safety information
•
Avoid Dangerous Environment – Don't use
products in damp or wet locations.
•
Don't Use In Rain.
2105 - 001 - 07.08.2023
•
Keep Children Away – All visitors should
be kept at a distance from work area.
•
Dress Properly – Do not wear loose
clothing or jewelry. They can be caught
in moving parts. Use of rubber gloves
and substantial footwear is recommended
when working outdoors. Wear protective
hair covering to contain long hair.
•
Use Safety Glasses – Always use face or
dust mask if operation is dusty.
•
Use Right Product – Do not use product for
any job except that for which it is intended.
•
Don't Force Product – It will do the job
better and with less likelihood of a risk of
injury at the rate for which it was designed.
•
Don't Overreach – Keep proper footing and
balance at all times.
•
Stay Alert – Watch what you are doing.
Use common sense. Do not operate
product when you are tired.
•
Store Idle Products Indoors – When not in
use, products should be stored indoors in
dry, and high or locked-up place – out of
reach of children.
•
Maintain Product With Care – Keep cutting
edge sharp and clean for best performance
and to reduce the risk of injury. Follow
instructions for lubricating and changing
accessories. Keep handles dry, clean, and
free from oil and grease.
•
Check Damaged Parts – Before further use
of the product, a guard or other part that
is damaged should be carefully checked
to determine that it will operate properly
and perform its intended function. Check
for alignment of moving parts, binding of
moving parts, breakage of parts, mounting,
and any other condition that may affect
its operation. A guard or other part that is
damaged should be properly repaired or
replaced by an authorized service center
unless indicated elsewhere in this manual.
Work area safety
•
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
•
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
•
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
5
Publicidad
