Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
SAFETY INSTRUCTIONS
When using an electrical wrench, basic precautions should always
be followed, including the following:
READ ALL INSTRUCTIONS
BEFORE USING THIS WRENCH
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in electric shock, fire
and/or serious injury.
WARNING: Do not attempt to modify or repair
the wrench.
WARNING: To reduce the risk of fire, electrical shock
or injury:
•
Shock Hazard. To protect against risk of electrical shock, do
not put charging base in water or other liquid.
•
Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
•
Use only as described in this manual. Use only
manufacturer's recommended attachments.
•
Do not put any object into openings. Do not use with any
opening blocked; keep free of dust, lint, hair, and anything that
may reduce air flow.
•
Do not incinerate the wrench even if it is severely
damaged. The batteries can explode in a fire.
Additional Safety Warnings
a ) This wrench is intended for professional, commercial
or industrial use only.
b ) Do not use a battery or wrench that is damaged or
modified. Damaged or modified batteries may exhibit
16
unpredictable behavior resulting in fire, explosion or risk
of injury.
c ) Do not expose a battery or wrench to fire or
excessive temperature. Exposure to fire or temperature
above 130 °C (266 °F) may cause explosion.
d ) Torque instruments perform correctly only when
properly used, cared for, and calibrated.
e ) A fastener improperly torqued with a torque
instrument may be very dangerous even if the torque
wrench is in proper working order or appears to be in
proper working order but is out of calibration.
f ) Lubricated and nonlubricated fastener applications
have major differences in the determination of
torque requirements. Designers of assembled joints
shall consider torque requirements consistent with
fastener characteristics.
g ) Do not tare out the weight of the wrench when using
in a gravity-dependent position.
h ) Have servicing performed by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the product is maintained.
SAVE THESE INSTRUCTIONS
Additional Safety Rules for Torque Wrenches
a
Read instruction manual before use.
g
Wear ear protection.
f
Wear eye protection
Wear safety footwear.
WARNING:
•
ALWAYS use safety glasses. Everyday eyeglasses are NOT safety
glasses. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
•
ANSI Z87.1 eye protection (CAN/CSA Z94.3)
•
Do not use the unit outdoors. Unit intended for indoor use only.
•
ALWAYS ensure accessories are not chipped or damaged to
reduce the risk of loose debris causing injury.
•
Do not expose to excessive heat or humidity to avoid
deformation or corrosion, which may affect accuracy.
•
Do not use this wrench in water since fluid ingress will affect the
circuitry resulting in damage and potentially electrical shock.
•
NEVER use on live electrical circuit, wrench does not protect
you from electrical shock. Turn off power before use.
•
Over torque (exceeding stated maximum capacity by 130%
can result in damage, breakage or affect accuracy).
•
Avoid use of solvents, chemicals, liquids.
•
Do not attempt to disassemble or repair. Refer to an authorised
service centre.
•
Guard against snagging of clothing, hair, jewellery or anything
that could impair movement of the product or work piece and
lead to damage or injury.
•
Over-torquing (110% of maximum torque range) could cause
breakage or impede accuracy.
Publicidad
