Publicidad
Idiomas disponibles
Idiomas disponibles
Selecting Direction of Ratchet Rotation (Fig. A)
1. To select clockwise rotation, rotate the for ward/re verse dial
2
to the left side.
2. To select counterclockwise rotation, rotate the for ward/
re verse dial
2
to the right side.
Proper Hand Position (Fig. F)
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the
anti-slip handle
.
4
Applying Torque (Fig. A, D—F)
WARNING : Familiarise yourself with operation and
feedback before use.
1. Ensure the socket is firmly and securely connected to the
fastener and wrench.
2. Hold the wrench handle
4
NOTE: Do not use accessories or an extension.
3. Using smooth effort, pull the wrench at 90° to the handle.
4. Ensure a smooth, gradual increase of force toward the target
value and status lights.
5. The wrench will produce an audible clicking when it reaches
100% of the target value.
6. Stop tightening.
MAINTENANCE
This tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
1. Clean your torque wrench with a dry cloth. Do not use any
solvent or detergent.
2. Never dismantle.
3-Point Calibration Certificate:
Torque testing and adjustment at the minimum, 60% and 100%
of the torque wrench capacity, within the standard's tolerances.
Issuing of a numbered and dated declaration of conformance.
Checking Tool Accuracy and
Document Updates:
The FACOM metrological laboratory will issue calibration
certificates upon request.
Calibration
An annual recalibration or after 5000 uses, is necessary to
maintain accuracy. Please contact your local dealer to schedule.
We advise you to have your torque wrench checked regularly on
a test rig or by the FACOM metrological laboratory (about once a
year, or more often for intensive use or if dropped).
with one hand.
Lubrication
Your power tool requires no additional lubrication.
Optional Accessories
WARNING: Since accessories, other than those offered
by FACOM, have not been tested with this product, use
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only FACOM-recommended
accessories should be used with this product.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. Products and batteries marked
w
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that
can be recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
www.2helpU.com.
Cleaning
WARNING: Electrical shock and mechanical hazard.
Disconnect the electrical appliance from the power source
before cleaning.
WARNING: To ensure safe and efficient operation,
always keep the electrical appliance and the ventilation
slots clean.
WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Ventilation slots can be cleaned using a dry, soft non-metallic
brush and/or a suitable vacuum cleaner. Do not use water or
any cleaning solutions. Wear approved eye protection and an
approved dust mask.
ENGLISH
19
Publicidad
