using the grinder
1. Before use, make sure that the grinder is empty and clean. Wipe the chamber
with a soft, dry cloth.
2. Do not overfill the appliance (maximum capacity: 50 g) and always proceedin
stages. Do not fill the grinder above the sidesof the appliance.
3. Before you start to grind the beans, attach thetransparent cover (2) to the
motor unit (1) and make sure that it is closed properly.
4. Press the on/off button (3) to turnthe appliance on. Release the on/off button
to turn it off.
•
We recommend pressing the on/off button in successive bursts and gently
shaking the coffee grinder so that all the coffee beans are ground uniformly and
the ground coffee does not stick to the bottom of the chamber.
•
Never use the coffee grinder continuously for more than 30 seconds. Allow the
coffee grinder to cool down for at least 1 minute between uses.
5. Always unplug the appliance from the mains after use.
6. Undo the lid and remove the ground coffee.
•
To preserve the flavour of your coffee, we recommend that you grind it
immediately before you brew it.
16
V.1.0
using the grinder
cleaning
Always unplug the appliance from
•
the mains before cleaning.
Never immerse the motor unit in
•
water or any other liquid.
•
Clean the body of the appliance (motor unit) with a soft cloth that has been
dampened with water and a gentle detergent (if necessary). Make sure that no
water gets inside the motor unit.
•
Do not use abrasive cleaners as they can damage the surfaces of the appliance.
•
The transparent lid can be cleaned with a soft cloth and warm soapy water. Do
put the appliance in the dishwasher.
•
Clean the grinding chamber with a small soft brush to remove any remaining
ground coffee, paying particular attention to the area between the blades and
the motor spindle.
Take care not to cut yourself on the
blades.
17
V.1.0
cleaning