Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING AND CARE
CAUTION: Before cleaning the unit, turn power off and unplug unit from the outlet.
CLEANING THE TRANSDUCER/ULTRASONIC MEMBRANE
The transducer/ultrasonic membrane must be cleaned to remove water mineral deposits when the clean
indicator/reset button illuminates red. Failure to do so may cause reduced or no mist output.
1. Remove the tank cover
and set aside.
4. Clean the transducer/ultrasonic
membrane with a 50/50 mix of white
vinegar and water on a cotton swab.
Wipe off with a damp cotton swab.
NEVER touch the transducer/ultrasonic
membrane with your fingers; the natural
oils in the skin can damage the surface.
NEVER submerge the base in water or any
other liquid.
2. Remove the tank and pour out
any water remaining in the tank.
5. After cleaning,
reassemble the
humidifier, fill with
water, plug in, and
turn on.
11
3. Twist as indicated to remove the
water reservoir from the bottom
of the tank and pour out any
remaining water.
6. Press and hold the clean
indicator/reset button for
3 seconds, until the clean
indicator turns off.
Publicidad
