ENG
1. Charging contact (USB Micro-B)
2. Charging contacts
3. Touch button
On/off/previous/next/answer/hang up
4. LEDs
5. Microphone
Power on and off
Take the earbuds out of the charging case, they will automat-
ically power on.
Place the earbuds in the charging case to automatically power
them off.
Or press and hold the buttons for about 5 seconds to power
them on or off.
Charging
Insert the earbuds into the charge case to charge them.
The charging contacts should be well connected.
The LEDs on the earbuds are lit red while charging. When the
earbuds are fully charged the LEDs turn off.
Charge the charging case via a Micro USB cable.
The LEDs on the charge case will flash blue while charging.
When the earbuds have low battery, a sound will be played.
Connect
This product can be used both as single earbud and dual
earbuds. The steps are similar. Just choose if you want to
use 1 or 2.
1. Take out the earbuds from the case. They will power on and
connect to each other (if you choose 2).
2. The earbuds' LEDs will flash red and blue. If you are using 2
ear buds, they will change to flashing blue.
3. Connect to the earbuds from your phone/device.
Refer to your phone/device manual if needed.
Usage
Gently put the earbuds into your ears.
Answer and hang up a phone call
Press the button to answer or hang up a phone call. Press and
hold for 2 seconds to reject a call.
Play/Pause
Press the button to play/pause.
Next song
Press and hold the button for 3 seconds on the right earbud
for next song.
Previous song
Press and hold the button for 3 seconds on the left earbud for
previous song.
Volume
Press the button 2 times on right earbud to lower volume.
Press the button 2 times on left earbud to increase volume.
You can also adjust the volume from your connected device
(eg. phone),
Voice assistant
Press the button on either earbud 3 times to activate voice
assistant. Works for Google assistant and Siri.
2
Safety instructions
1. Never disassemble or modify the product to avoid damage
to the product and to avoid danger.
2. Do not store in extreme temperatures
(below 0°C or over 45°C).
3. Do not use harsh chemicals or strong detergents
when you clean this product.
4. Keep dry.
5. To avoid hearing damage, make sure that the volume is set
to low before connecting. Gradually turn up the volume until
you reach a comfortable listening level.