Switch Off The Device; Source Selection - TechniSat DIGITRADIO BT 1 Instrucciones De Uso

4.4.2

Switch off the device

Power saving mode:
> Pressing and holding the On/Standby button (1) switches the appliance to
power-saving mode and the display goes out. The message [Goodbye]
appears briefly on the display.
Standby mode:
> Briefly press the On/Standby button (1) to switch the device to standby
mode. The message [Standby] appears briefly on the display, followed by
the time/date and the battery charge status.
4.4.3

Source selection

> The MODE button (2) can be used to switch between the sources DAB+
(digital radio), FM (FM), Bluetooth and AUX. To do this, briefly press the ok
button until the desired source is shown on the display.
24