Publicidad
Idiomas disponibles
Idiomas disponibles
CAREFUL:
• Before installation, check that the wall or wall module has sufficient load capacity to support the
hood.
• When drilling holes in the wall, you should always make sure there are no electrical wires or
other objects that could be damaged.
• Check that ventilation openings are unobstructed.
NOTE: Recommendations for installation
• During installation, ask someone else to help you.
• Wear protective gloves to avoid injury from sharp edges.
Wall mounting
Wall mounting
• Mark the holes required for wall mounting using the provided drilling template and check
them with a spirit level.
• Drill two holes in the wall and place the dowels. Then tighten the mounting screws until
they come out about 8mm from the wall.
• Hang the hood and tighten the screws through the hood body. Make sure the mounting is
secure and the position is horizontal.
Mounting underneath the wall module
28
Publicidad
