Publicidad
Idiomas disponibles
Idiomas disponibles
USE OF THE RECEIVER CONTROL PAD
The control pad (17) keys allow you to:
- adjust the VOLUME functions by clicking on the corresponding key,
- access the main menu.
Main menu
Press to access the main menu.
Please refer to the "operation of the main menu" paragraph to discover the functions of the main menu.
Volume control
Press the
key to increase the volume or the
Navigation buttons in the menu
Once in the main menu, use the
Mute mode
It is enabled when you put the volume to its lowest setting. Only the visual alarm is enabled.
CONNECTION OF THE CAMERA TO THE RECEIVER
The connection process (pairing) links the receiver to the camera so that they can communicate without other appliances (even
other cameras) being able to interfere with the receiver or receive your signal.
Connect the camera and switch on your receiver by pressing on the start button (12).
Use the control panel to access the menu and connect the camera to the receiver.
A. CONNECTION BETWEEN THE CAMERA AND THE RECEIVER
1. Select the
"Menu" icon.
2. Select the
icon.
3. Select the
Confirm
.
Confirm
will be automatically highlighted.
- If the connection is correctly made, the
symbol will appear above the "CAM". The receiver will beep and the screen will
display the image captured by the camera. Your appliance is now ready for use.
- If the connection fails, the image of the interrupted signal will appear together with a sound signal. Repeat connecting stages 1 to 4.
14
key to lower the volume.
key to move left and the
key to move right.
CAM1 CAM2 CAM3 CAM4
icon.
4. Once you have selected the camera
. The available camera
number,
confirm
the "Pairing" button (8) of the
transmitter down.
C. DISCONNECTING A CAMERA
5. Select the
menu icon.
6. Select the
icon.
Confirm
.
From the main menu, you can set the following functions up:
Brightness
To adjust the brightness of the receiver screen.
Use the
Press the
Camera
When you have several cameras connected to a receiver, this icon allows you to enable the
"switch" mode. The screen will display the image captured by all the connected cameras with a
10 second interval. The
When you have several cameras connected to the receiver, this icon will allow you to choose the
camera you want to display on the screen.
Used to add a camera.
Refer to the pairing section to connect a new camera to the appliance.
and
hold
Used to delete a camera.
Refer to the delete a camera section.
Zoom
You can zoom in on the image.
Select X2 to zoom in and X1 to zoom out of the image on the screen.
CAM1 CAM2 CAM3 CAM4
7. Select the
icon. Confirm
.
8. Select the camera you want to delete.
Confirm
confirm the deletion and the screen
will return to the image captured
by the last camera connected to the
receiver.
OPERATION OF THE MAIN MENU
and
keys to select the brightness level required.
key to come back to the screen.
switch light will appear on the screen.
EN
. A sound signal will
15
Publicidad
