Kenmore ELITE 141.16688800 Guía Para El Uso Y Cuidado página 22

1. Remove allcomponents fromthecarton.
2. Attachthe MotorBracketon the outsideof the right grill bowl panel. Align the two holesof the
Bracket w ith the holeson the grill bowl.Tightensecurely usingtwo Screws #10-24x3/4" U NC,Plain
Washers andNutsprovided.
illllllllllllllllll/
Rot. Screw #10-24x3/4" UNC x2
Rot. Washer x2
Outside of Left Grill Bowl Panel
Washer
J_--- /
/
#10-24 Nut
/-
Rot. Nut #10-24 x2
/
/
Rot. Screw#10-24x3/4" UNC
with washers and nuts
/
/
/
l
Motor Bracket
,
Slide the Spit through the piece of meat or poultry and the Holding Forks onto each end of the Rotisserie
Spit. Adjust spacing between Holding Forks to accommodate your food, then tighten the Thumbscrews
to keep the Holding Forks in position. Slide the Collar and Bushing onto the threaded end of the Spit.
Do not tighten the Collar Thumbscrew until the Rotisserie is placed into your grill.
Holding Forks
\
\\
\
\
\
\
\
\\
\
Spit
Thumbscrew
1/4"x1/2"
Thumbscrew
1/4"x1/2"
Bushing
Collar
-.• ........ J
Rot.Thumbscrew 1/4"xl/2" x3
22