Fagor PBZ6VI501FTB6S6C Manual De Instrucciones página 57

OPERATION
Timer
Timer function makes cooking easier by making it possible to set Duration. It can also be used
as a Kitchen Timer.
Set the Timer
Timer function allows the cooking zone to be switched off after the set time has elapsed. The
timer function can only be set when a cooking zone is operating (heat setting is greater than
"0"). The timer function can be set independently for all six cooking zones. Timer countdown
can be set from 1 to 99 minutes.
To set the timer:
● Touch (2) sensor to set the desired heat setting ranging from 1 to 9. The display will show
the selected heat settings from 1 to 9 (for example (4)).
● Simultaneously touch (+) (4) and (-) (5) sensors of the Timer. The timer display (6) will show
digits (0.00) and the corresponding timer symbol (7).
● then set the cooking zone operation time by touching (+) (4) or (-) (5) sensor.
Change Timer Duration
Programmed Timer setting can be changed at any time.
To change the programmed Timer setting, activate Timer by touching (+) (4) sensor and (-)
(5) Timer sensor.
Check Timer Duration
To check the remaining Duration at any moment select appropriate Timer symbol (7) by simul-
taneously touching both (+) (4) and (-) (5) sensors the required number of times.
Stop the Timer
When the set time has elapsed an acoustic signal is sounded, which can be muted by touch-
ing (+) (4) or (-) (5) sensor. If no sensor is touched, the acoustic signal will stop automatically
after 2 minutes.
To stop the timer countdown before the set Duration has elapsed:
● simultaneously touch both (+) (4) and (-) (5) sensors the required number of times to select
the appropriate Timer symbol (7) of the corresponding cooking zone and then reduce the
time to "00" by touching the (-) (5) sensor.
57