Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATIONS
@ For automatic play (auto-in, auto-return)
oon POWER oorr
When
play is completed,
the
tonearm (4) automatically re-
turns to the arm rest(13)and the
platter) stops.
Depress the POWER switch@)
(ON) (2). The power is sup-
7
plied to the turntable.
When
you are not playing a
disk, depress the POWER swi-
tch@) and turn off the power.
Always switch the power off
when you do not intend to use
the turntable.
20Nn
P
Place the disk on the platter
8
on POWER Qorr
mat.
Secure
the rest hook
to the
Remove the stylus cover.
tonearm(4),
CAUTION
_
1. The disk size is detected by light. This is
N)
why auto-play is sometimes not possible
A
Unfasten the rest hook.
with transparent or semitransparent col-
CS
ored disks, phonograph sheets and disks
which
are seriously warped.
Play these
types
of disks
in the manual
mode
in-
stead.
. This unit may not operate correctly when
exposed
to strong
light such
as direct
sunlight etc. In this case, take measures
to avoid strong light.
. Precautions with auto-play
(1) Unfasten the rest hook and depress the
START/CUT switch.
(2) Auto-play is not possible with 25 cm disks
and so play them manually.
(3) Unless playing 30 cm disks at 33-1/3 rom
or 17 cm disks at 45 rpm, set the SPEED
select switch @ to the figure correspon-
ding to the rated speed of the disk before
depressing the START/CUT switch.
Lower the dust cover gently.
Depress
the
START/CUT
switch(0), then the platter (1)
START/CUT
ed
starts rotating, the tonearm(4)
is lowered onto the disk and
play starts. (auto-in)
. Do not touch the tonearm(4 or selector while
the tonearm @4 is moving.
. The mechanism
for auto-in, auto-return, and
auto-repeat operates correctly when
playing
an IEC standard disk. But if a non-standard
disk is set to automatic play, the stylus tip
may be damaged because the stylus descends
outside the lead-in groove,
or the tonearm
may not return automatically to the rest. Play
non-standard disks manually.
Publicidad
