lid onto the jar assembly. Place the measure cup exactly into the lid by fitting the small projection on the both
sides of the cup into the slots of the lid and turning the jar cover clockwise until tight. (See Fig.3)
2) Finally, place the assembled jar onto the motor unit by aligning the strip on the assembled jar bottom. (See
Fig.4)
CAUSION: Jar and jar base is now secure. Do not try to twist the jar and jar base onto motor unit
HOW TO USE
1. Peeled or cored the fruit or vegetables and then cut it into small dices.
2. Place the food to be blended into the jar(See Fig.5). Usually, certain amount of purified water has to be
added to facilitate the smooth running of appliance.The amount of mixture should not exceed the max level as
indicated on the jar.
RECIPE
FOOD TYPE
Carrot (apple, pear
etc. )
Ice crush
Note: never use boiling liquids or run the appliance empty.
3. Put the lid on the jar. Be sure the measuring cup is in place.
4. Plug the power cord into a standard wall outlet.
5. Turn the speed knob to the appropriate speed setting for your task.
6. For quick or delicate blending tasks, turn the speed knob to P position and hold for a few seconds and then
release, the knob will reset to O position automatically. Operate several times until the consistence you want is
obtained
7. If you want to add ingredients while the blender is working, remove the measuring cup and place through the
lid opening. (See Fig.6)
8. When crushing ice or hard food, keep one hand firmly on the lid.
9. When the consistence you desire is obtained, turn the knob to O position.
Note: 1) For each use, the consecutive operation time should be less than 2minutes. at least 10 minutes
rest time must be maintained between two continuous cycles, let the unit cool to room temperature before
performing next operation cycle.
2) If you want to stop the machine during operation, turn the knob to O position anytime.
SPEC
Cut into 15mm*15mm*15mmm
25mm*25mm*25mmm
WEIGHT
SPEED
Carrot:600g
High speed
Water: 900g
100g
Ice crush clean
23