COMPACT N&D
EN
Symptom
• The device does not respond to the
remote control.
• The device beeps intermittently.
• When turning on the device or
during operation E9 is shown on
the display (compressor protection).
The device automatically turns off
and E9 is shown on the display
until the device has a tilt of less than
45º.
• Inside the cab water is falling or
filtered from the outside.
All manuals and user guides at all-guides.com
• Remote control not programmed.
• Remote control battery flat; the LED does
not come on.
• Electronic control faulty.
• Remote control defective.
• Belt poorly connected or inverted in the
keypad.
• Tilt of the device 45º or more.
• Drainage pipes or valves blocked.
• EPDM seal badly stuck or faulty.
• The cabling outlets out of the inner cover
of the evaporator compartment and the
centrifugal blower are not correctly sealed.
22
Cause
®