Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
1 MAKE SURE YOU HAVE READ ALL SAFETY INSTRUCTIONS.
2 This tool comes completely assembled. There is no assembly required.
OPERATION
Never load staples and nails at the same time
Loading your tool with staples.
1. Remove pusher rod from machine ( FIG.#1 ).
2. Insert strip of staples into magazine.
3. Replace pusher rod.
Loading your tool with Brad nails.
1. Remove pusher rod from machine (FIG.#2 ).
2. Insert strip of nails into left channel of magazine.
(side with:
)
3. Replace pusher rod.
Attempting to force brad nails into right side of
staple chamber may cause damage to the tool.
Cleaning Staple Chamber.
1. Remove pusher rod "A"( FIG.#3 ).
2. Remove screw & nut from hole "B".
3. Remove entire magazine from housing.
BACK TO
INDEX
5
Publicidad
