Ideal Test Pro 360 Serie Manual Del Usuario página 10

Indicating Phase Rotation (continued)
7. If the meter indicates "OK" in the display (upper left-hand side),
a. Turn power off to the circuit.
b. Label each phase cable as R, S, or T following the test
lead connections to the labeled meter inputs.
8. If the meter indicates an
left-hand side), the phase rotation is counter-clockwise.
a. Turn power off to the circuit.
b. Switch any two test lead connections to the phase
cables.
c. Turn power on.
d. The meter will now indicate "OK" in the display.
e. Turn the power off.
f. Label each phase cable as R, S, or T following the test
lead connections to the labeled meter inputs.
Page 10
message in the display (lower