Descargar Imprimir esta página

Diamond 1100 Manual De Instrucciones página 30

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 69
geneRAl SAfeTy InfORMATIOn
Contents of the supply
Appliance
Cover/s
Metallic rack/s
Rack support grid
Optionals (only when indicated in work order).
Pipes and/or wires for connections to energy sources (only when indicated in work order).
N.B.! The supply may vary depending on the order.
Intended use
The use of the appliance treated in this document must be considered "Proper Use" if used for cooking or re-
generation of goods intended for alimentary use; any other use is to be considered "Improper use" and therefore
dangerous.
The appliance must be used according to the foreseen conditions stated in the contract within the prescribed
capacity limits carried in the respective paragraphs.
Allowed operating conditions
The appliance has been exclusively designed to operate inside of rooms within the prescribed technical and capacity
limits. The following indications must be observed in order to attain ideal operation and safe work conditions.
The appliance must be installed in a suitable place, namely, one which allows normal running, routine and extraordinary
maintenance operations. The operating area for maintenance must be set up in such a way in which the safety of the
operator is not endangered.
The room must also be provided with the features required for installation, such as:
room temperature > + 5 °C;
maximum relative humidity: 80%;
maximum cooling water temperature > + 10 °C;
the floor must be perfectly level, flat and slip-proof;
the room must be equipped with a ventilation system and lighting as prescribed by standards in force in the country
of the user;
the room must be set up for draining greywater, and must have switches and flood gates which cut all types of sup-
ply upstream the appliance when needed;
the walls around the appliance must be fireproof and/or insulated against possible heat sources.
Test inspection and warranty
Test inspection: the appliance was inspected by the manufacturer during assembly at the production site. All
inspection certificates will be delivered to the customer.
Warranty: the appliance is covered by a 12-month warranty, according to the details carried on the sales con-
tract. If during the period covered by the warranty, defective operations occur or faulty equipment parts are
found which are included in the warranty conditions, after proper verifications, the faulty parts will be repaired
or replaced.
The faulty parts covered by the warranty will be repaired or replaced free of charge. The customer will take care
of transportation and/or shipping expenses, as well as 2-way trip expenses relative to the interventions of the
manufacturer's technicians at the customer's site.
labour costs relative to the intervention of the manufacturer's technicians at the customer's site for repairing
defects covered by the warranty are at the customer's expenses, unless the nature of the defect can easily be
taken care of by the customer.
All expendable equipment and materials supplied by the manufacturer together with the unit are excluded from
the warranty.
The Manufacturer is liable for the equipment in its original configuration.
The manufacturer will not be held liable for improper use of the appliance, for damage caused ensuing opera-
tions not taken into consideration in this manual or without prior authorisation of the manufacturer himself.
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
- 7 -
7

Publicidad

loading

Este manual también es adecuado para:

G1/2ba1G2sa11G4sa11G2sf11G4sfe11