Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions
The wiring of oven must be equipped with all-pole disconnection device according to the wiring rules.
After installing the appliance, it is necessary to have other methods to disconnect the power supply. The
power supply is disconnected by a contactable plug or by a fixed wiring switch that meets the wiring
requirements.
Important information
The appliance is designed to be permanently installed with a three-pin power cord and may only be connected
by a
licensed expert in accordance with the connection diagram.
Only a qualified electrician who takes the relevant regulations into account may replace the power cord.
Do not use multiple plugs, power strips or extensions.Overloading causes a risk of fire.
If the connection is no longer accessible following installation, an all-pin isolating switch with a contact gap of
at least 3mm must be provided.
Connect the wires of the mains power cord in accordance with the following colour
coding:
Green and
Yellow
Blue
Brown
Electrical Connectors
Warning
Earth wire
(E)
Neutral wire (N)
Live (L)
For installation personnel
39
Publicidad
