Publicidad
Idiomas disponibles
Idiomas disponibles
6.
OPTIONAL FUNCTION
Normal mode (When unit is not operating)
Change to the function setting mode
Press the
simultaneously for more than 3 seconds.
Mode Setting
ºC
* Set at "Auto" in normal condition.
*
In the case that the remote control switch not available mode is set by central station, Mode
setting is not available
( )
Cancellation of Adjusting Set Temperature for Heating Operation
ºC
*
In the case that the the indoor units are set, at both "Standard" and "Cancel" setting, the
indication will be " " in such case by pressing
( ) Push twice
Simultaneous operation Setting (Total Heat Exchanger model only)
ºC
( )
Remote Control Main-Sub Setting
ºC
(
)
(
) and
( ) Switch
Press the
Operating Mode
Mode No.
Press the
Setting
Mode No.
Press the
Setting
Mode No.
Press the
Setting
When this setting is changed, cut off the power supply of
Mode No.
all indoor units after returning the normal mode
OPTIONAL FUNCTION
Press the
simultaneously
Switch and select the operation mode
: Auto
: Fan
: Cool
Temp.
: Dry
: Heat
Switch and select the operation mode
: Standard
: Cancel
, all the indoor units can be set at " " or " "
Switch and select the operation mode
: A/C
: VENT I
Temp.
: A/C + VENT I
Switch and select the operation mode
: Main Remote Control Switch
: Sub Remote Control Switch
7
(
)
(
) and
( )Switch
Temp.
Temp.
Publicidad
