Gude GAFS 280 Traducción Del Manual Original página 14

ENGLISH
Battery
Fire hazard Explosion hazard
Never use damaged, defective or defomated
batteries. Never open, damage or drop the battery.
Never charge the device in the vicinity of acids and
easily flammable materials.
Protect the device from heat and fire.
Use device only in an ambient temperature
between 10°C to +40°C.
Never place the device on radiators or expose it to
strong sunlight for a long time.
Allow to cool down first after heavy loading.
Charging the battery
Make sure that the device is switched off.
Insert the plug of the power supply unit into the
charging port and then insert the power supply unit
into the power socket. The indicator light flashes
blue during the charging process. When charging is
complete, the indicator light will be solid blue.
Disconnect the AC adapter from the power supply,
and then unplug the AC adapter from the charging
port. Only use the Güde charger to charge the battery.
If other chargers are used, defects may occur or a fire
may be started. Vapors may escape if used improperly
or if damaged batteries are used. Supply fresh air and
consult a physician in case of complaints. The vapors
may irritate the respiratory tract.
Working instructions
The devices are supplied only partially pre-charged
and must be fully charged for the first time before use.
Recharge the device if the device runs too slowly or
stops.
The device can be recharged at any time without
shortening the service life. Interrupting the charging
process will not damage the battery.
Maintenance and cleaning
Repairs and work not described in these instructions
may only be carried out by qualified personnel.
Only use original accessories and original spare parts.
Do not clean the machine and its components with
solvents, flammable or toxic liquids. Use only a damp
cloth for cleaning. Proper and regular cleaning ensures
safe operation and prolongs the service life of the
machine
Warning.
Before carrying out cleaning and maintenance work,
switch off the device, disconnect it from the power
source and allow it to cool down to avoid burns and
electric shocks.
Always empty the water tank when you have finished
the work. Wipe the unit with a slightly damp cloth
14
and then dry it.
Wash the tips under running water and let them dry.
Warning!
Do not immerse the power adapter or the device in
water or other liquids.
Cleaning the head
Switch off the device.
Remove the suction attachment from the housing.
Wash the attachment under running water and then
allow it to dry completely.
Replace the suction attachment. Before using the
device again, make sure that all parts are dry and
correctly assembled. Cleaning the dirty water tank
Switch off the unit.
Disconnect the dirty water tank from the housing.
Separate the tanks from each other. Wash the tanks
under running water with a little detergent. Allow
them to dry or dry them with a paper towel, rag, etc.
Assemble the tanks and place them in the housing.
Cleaning the microfiber cloth
Remove the microfiber cloth from the washing
attachment. Wash it in the washing machine with
similar items according to the washing instructions on
the label.
Only a regularly maintained and well cared for device
can be a satisfactory tool. Lack of maintenance and care
can lead to unpredictable accidents and injuries.
If necessary, you can find the spare parts list on the
Internet at www.guede.com.
Store the device in a dry place.
Warranty
The warranty period is 24 months for consumers
and begins at the time of purchase of the device.
The warranty covers only defects that are due to
material or manufacturing defects. When claiming
a defect within the meaning of the warranty, the
original purchase receipt with the date of sale must
be enclosed.
Improper use, e.g. overloading of the device, use of
force, damage due to external influences or foreign
bodies are excluded from the warranty. Non-ob-
servance of the operating instructions and normal
wear and tear are also excluded from the warranty.
Important customer information!
Please note that a return within or even outside
the warranty period should always be made in
the original packaging. This measure effectively
avoids unnecessary transport damage and its often
contentious settlement. Only in the original carton
your device is optimally protected and thus a smooth
processing is ensured.