Hendi 221419 Manual Del Usuario página 7

scrapped. Do not remove the build-in battery yourself! Bring
the appliance to a qualified professional.
• The batteries are to be disposed of safely.
• Remove the charging cable from the appliance as soon as
the battery is fully charged. Do not leave the appliance being
charged for an extended amount of time.
• Only charge this appliance with extra low voltage, corre-
sponding to the marking on the appliance.
• Only use the supplied charging cable to recharge the battery.
Intended use
• This appliance is intended to be used in household and simi-
lar applications such as:
- staff kitchen areas in shops, offices and others working en-
vironment;
- farm houses;
- by clients in hotels, motels and other residential type en-
vironment;
- bed and breakfast type environment.
• The appliance is designed for crushing, mixing, mashing and
pureeing suitable soft ingredients in a container. Any other
use may lead to damage of the appliance or personal injury.
• Operating the appliance for any other purpose shall be
deemed a misuse of the device. The user shall be solely liable
for improper use of the device.
Main parts of the product
(Fig.1 on page 3)
1. Top cover
2. ON/OFF button (variable speed control)
3. Main body
4. Release buttons
5. Blending shaft
6. USB-C charging port
7. Power indicators (4 levels)
8. Speed indicators (5 levels)
9. USB-C cable
Remark: The content of this manual applies for all listed items
unless specified otherwise. The appearance may vary from the
shown illustrations.
Preparation before use
• Remove all protective packaging and wrapping.
• Check that the device is in good condition and with all ac-
cessories. In case of incomplete or damaged delivery, please
contact the supplier immediately. In this case, do not use the
device.
• Clean the accessories and the appliance before use (See ==>
Cleaning & Maintenance).
• Make sure the appliance is completely dry.
• Place the appliance on a horizontal, stable and heat resistant
surface that is safe against water splashes.
• Keep the packaging if you intend to store your appliance in
the future.
• Keep the user manual for future reference.
NOTE! Due to manufacturing residues, the appliance may emit
a light odor during the first few uses. This is normal and does
not indicate any defect or hazard. Make sure the appliance is
well ventilated.
Operating instructions
• Handle the blending shaft with extreme care, the blades are
very sharp.
• To avoid splashing, always insert the blender shaft into the
mixture before switching on, and switching off before remov-
ing.
• Do not operate the appliance for more than 1 minute every
time. Cooling for 3 minutes is needed before using the ap-
pliance again.
1. Fully charge the appliance before and after use. With a full
charge, the appliance could be continuously operating for ap-
proximate 20mins depending on usage.
2. One-off protection system is equipped in a new appliance. It
must be unlocked by charging for the first time use.
3. Assembly the blending shaft to the main body and make sure
it is installed securely.
4. Press ON/OFF button for one time to inactivate the safety
lock. Power indicator(s) lights up.
NOTE: If no operations in 3s, safety lock will be activated
again. Power indicators light off.
5. Switch on the appliance by pressing and holding the ON/OFF
button immediately after the safety lock is inactivated. Speed
indicator(s) lights up. Level 5 is the highest speed.
6. Adjust the speed regarding the depth level of the ON/OFF
button.
7. Place the appliance vertically against the mixtures during
use.
Charging
1. Charging the appliance by using the correct input rating. See
technical specifications.
2. Power indicator(s) is flashing during the appliance is being
charged. When the appliance is fully charged, 4 levels of pow-
er indicators light up. A whole complete charging cycle (0% to
100%) takes approximately 4hrs.
3. Power indicator(s) will continuously light up under operation.
It will be reduced regarding to the remaining power of the
battery.
4. When the power is less than 25%, the power indicator is
flashing under operation.
Cleaning & maintenance
• Do not use water jet or steam cleaner for cleaning and do not
push the appliance under the water as the parts will get wet
and electric shock might be resulted.
• If the appliance is not kept in a good state of cleanliness, this
can adversely affect the life of the appliance and result in a
dangerous situation.
• Food residues should be regularly cleaned and removed from
the appliance. If the appliance is not cleaned properly, it will
reduce its lifespan and may result in a dangerous condition
during use.
• DANGER OF INJURY! Care should be taken when handling
the sharp cutting blades during cleaning.
GB
7