Costway AD10018 Manual Del Usuario página 5

EN
IMPORTANT! READ CAREFULLY AND KEEP FOR
FUTURE REFERENCE
Do not remove the tray while the baby is in the high chair;
the tray cannot be adjusted forward or backward when using
the toy bar.
● The figures in the instructions are an illustration of the right operation and
product structure. When there is a small difference between the actual
product and the picture. Please refer to the actual product.
● In order to improve the quality of products. We may have improved the
quality without informing you in advance.
WARNING:
FALL HAZARD: Children have suffered severe head injuries, including skull
fractures, when falling from high chairs. Falls can happen suddenly if child
is not restrained properly.
Always use restraints, and adjust to fit snugly.
Stay near and watch child during use.
● Read the instruction manual before using this product.
● If not operated according to instructions, product may become dangerous
for children.
● This product is suitable for children who are 6-36 months old.
● Do not use when chair parts are broken, torn or missing.
● Be sure all users are familiar with operation and that the chair can be
opened and closed easily.
● Don't operate forcibly and read the instruction to do it in right way.
● Carefully check that all parts can be normally installed and adjusted. Be
sure all safety locks are operational.
● Children must use the safety belt when sitting in the chair, in order to
prevent falling or sliding.
● Only use product on flat, stable ground. To prevent the tipping of the
chair, avoid placing heavy goods on the tray.
08
● Avoid placing the chair near any heat sources, such as electric heaters or
gas heaters.
● The child should be secured in the high chair at all times by the restraining
system, either in the reclining or upright position. The tray is not designed to
hold the child in the chair.
● It is recommended that the high chair be used in the upright position only
by children capable of sitting upright unassisted.
● When the children are sitting in the chair. Don't leave him unattended.
● Please do not use this product when your baby is unable to sit
independently.
● Don't let your child play, climb alone, or hang on the chair.
Assembly Drawing
Step 1: Insert front end of the right and left leg brackets (R, L) into the chair
body sockets as shown by arrow 1.
*The buttons should be facing outward and the tray support notch should be
in the rear.
Step 2: Insert front and rear foot supports (A, B) into leg brackets as shown
by arrows 2.
WARNING:
Please ensure leg brackets and sockets are locked in place before
operation. Make sure the fixed and non-slip foot support A is installed in the
front and the foot support B with wheels is installed in the rear.
09