Costway AD10018 Manual Del Usuario página 8

Chair height adjustment
Lift the up and down button at the backrest to adjust the height of the chair
body (7 total positions).
WARNING: Do not adjust the height of the chair when the child is sitting, to
avoid any injury.
use hand to pull
WARNING: This product uses the brake friction plate to control the movement
of the chair body. Keep the foot pipe support clean when in use. Avoid any oil,
water, and liquid stains. If spillage does occur, completely dry before you
continue to use.
Backrest angle adjustment
Pull the adjusting lever at the back of the backrest in the forward or backward
direction. The backrest can be adjusted to your needed angle (4 total
positions).
use hand to pull
14
(pic 7)
(pic 8)
Press Open
Safety Harness
WARNING: Use safety harness at all times!
The child must be secured by the safety restraint system at all times, both in
the upright and reclined positions.
Harness Operation
Press the red button on the 5-point safety harness firmly to open the child
restraint and place child in chair. Place child's arms in straps and connect
arm buckles to leg strap buckle with audible "click" between the legs. Tighten
strap lengths to fit child securely.
Insert arm fasteners into the leg strap buckle until you hear an audible
"click". Press red buckle button firmly to open.
(pic 10)
Removable Anti-slip Leg Divider
1. Use a cross-head screwdriver to attach or remove the screw that fastens
the leg divider to the bottom of the seat.
2. Hold the leg divider and pull outward.
Locked
(pic 9)
15