Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
CLEANING THE EXTERIOR OF THE AQUA ✓ NANO EXTREME
To clean the exterior of your filter and cartridges, use a clean, damp cloth and mild, non-
abrasive liquid soap. Do not use dishwashing soap. Rinse thoroughly with warm water.
Note: Do not submerge the base unit or let stand in water. Excessive moisture inside
the unit will damage it and void the warranty.
Use of polish, detergents, abrasives, cleaners, organic solvents, or acid may cause damage.
USE OF OTHER THAN A DAMP SOFT CLOTH AND MILD LIQUID SOAP WILL
VOID YOUR WARRANTY.
LED INDICATOR LIGHTS
Your Aqua ✓ Nano Extreme water filter features a visual flow meter integrated into the
base of the unit. When water is flowing through your filter, LED (light emitting diode)
lights will flash to indicate the following:
•
FILTERING The blue light indicates that the unit is functioning normally.
•
REORDER The yellow warning light lets you know approximately 1,893 liters (500
gallons) of life is left in the Main Filter Media Insert. Contact your Rena Ware
Consultant or Rena Ware Customer Service Center to order a replacement. The blue
light also indicates that your filter is still working.
•
REPLACE The red warning light indicates that the effective life of the Main Filter
Media Insert has ended. The blue light will not illuminate. Replace the Main Filter
Media Insert before continuing to use your filter.
EN
13
Publicidad
