Publicidad
Idiomas disponibles
Idiomas disponibles
there is considerable vibration or if other defects are
detected. If this condition occurs, check the tool to
determine the cause.
j)
Do not use separate reducing bushings or adapters to
adapt large hole grinding wheels.
k) Check that the workpiece is properly supported.
l)
Use only grinding wheels approved by RYOBI.
m) Ensure that sparks resulting from use do not create
a hazard, e.g., do not hit people, or ignite flammable
substances.
n) Always use protective safety glasses and ear protectors.
o) Use other personal protective equipment such as
gloves, apron and helmet when necessary.
p) Never place the tool on the floor or other surfaces while
it is running. Grinding wheels continue to rotate after
the tool is switched off. Never touch the wheel or place
it on the floor or other surfaces while it is rotating.
q) The flange and clamp nut must have the same outer
diameter.
r) Use the tool only for approved applications. Never use
coolants or water or use the tool as a fixed tool.
s) Grip the tool securely with both hands while operating.
INTENDED USE
Grinding metal or cutting materials such as metal or stone.
Use the tool only for approved applications. Use of the
power tool for operations different from intended could
result in a hazardous situation.
MAINTENANCE
WARNING
Do not make any adjustments while the motor is in
motion.
Always disconnect the power cord from the socket
before changing removable or expendable parts,
before lubricating or working on the unit.
■
After use, check the tool to make sure that it is in good
condition.
■
It is recommended that you take this tool to a Ryobi
Authorized Service Center for a thorough cleaning and
lubrication at least once a year.
■
If the power supply cord is damaged, it must be
replaced only by the manufacturer or by an authorized
service center to avoid risk. Contact authorized service
center.
WARNING
To ensure safety and reliability, all repairs should be
performed by an authorised service center or other
qualified service organisation.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories
and
packaging
environmental-friendly recycling.
SYMBOLS
Safety Alert
Class II tool, double insulation
Please read the instructions carefully
before starting the product.
Wear ear protection
Wear eye protection
Wear dust mask.
Do not use chipped, cracked or
defective grinding wheel
Not for wet grinding. Using water or
other liquid coolants may result in
electrocution or shock.
Not for face grinding
For cutting stone
Wear safety hand gloves
Wear non-slip safety footwear when
using this equipment
Wear personal protective equirment
EurAsian Conformity Mark.
CE Conformity
English
should
be
sorted
for
3
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
EL
TR
Publicidad
