CP Desoutter PT250-T4000-S19S Manual Del Usuario página 45

General
Tightening of threaded connections
The tightening torques indicated in the spareparts list are established to achieve the correct
clamping force and preverting the parts from coming loose. At service these parts must be
able to open up without being destroyed. At special circumstances (depending on application
and usage) the parts may however com loose after some time of operation. In such cases
the torque could be increased 10-20% and if necessary some type of low or medium
threadlocking fluid could also be applied.
Example
Operating Instructions
Starting
Position of reversing knob when used by right-handed
+ 10-20% Nm
LOCTITE
Forward
Reversing
Change of bit
Position of reversing knob when used by left-handed
Part no 2050505663
Issue no 1
Series no C
Date 2006-10
Page 45/51