ClickTronic HC 461 Manual página 10

Manual
Troubleshooting
No image:
• Check all plug-in connections.
• Check the connecting lines Is any line damaged?
• Turn off the HC 461 by using the main switch on the rear side of
the device, unplug the power supply and wait about 5 minutes.
Then restart the device as previously described in this manual.
No sound:
• Check all plug-in connections.
• Check the connecting lines. Is any line damaged? Are the lines
suitable for audio and video transmission?
• It might be required to reset the switch. Turn off the HC 461 by
using the main switch on the rear side of the device, unplug
the power supply and wait about 5 minutes. Then restart the device
as previously described in this manual.
• Is there a video recording device connected to one of the outputs?
In this case HDCP automatically blocks the sound signal
transmission.
10