Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
product damage due to a short circuit, never
immerse your power adapter in fluid or allow
a fluid to flow inside it. Corrosive or
conductive fluids, such as seawater, certain
industrial chemicals, and bleach or bleach-
containing products, etc. can cause a short
circuit.
TO OPERATE WITH FLEX 24V POWER
ADAPTER
WARNING
repaired immediately.
WARNING
the nameplate. If connected to outlet with
voltage higher than indicated on the nameplate,
the power cable will burn up.
WARNING
FLEX power tools including FLEX Miter Saw
FX7141A and Table Saws FX7211, FX7221.
Always read the operator's manual of the power
tool you intend to use this power adapter with.
a. Remove the battery pack from the power tool.
b. Attach the battery adapter onto the power tool
firmly and then connect the plug of the power
adapter to a regular power outlet.
c. To remove the battery adapter, depress the
release button, pull the battery adapter out
and remove it from the tool.
OPERATING INSTRUCTIONS
To reduce the risk of fire,
personal injury, and
Do not use the electrical
cord if damaged. Have it
Do not use at voltage
higher than indicated on
This power adapter can be
used only with select
WARNING
create or use accessories not recommended
for use with this power adapter. Any such
alteration or modification is misuse and could
result in a hazardous condition leading to
possibly serious personal injury.
Fig. 2
-9-
Do not attempt to modify
the power adapter or
Release Button
Battery
Adaptor
Publicidad
