Publicidad
Idiomas disponibles
Idiomas disponibles
AVAILABLE ACCESSORIES
Visit your Sears Hardware Department or see the
Sears Power and Hand Tool Catalog for the following
accessories_
ITEM
Replacement grinding wheels
Wire and Buffing wheels
Spacers
Universal stand
STOCK NUMBER
See catalog or store
See catalog or store
See catalog or store
See catalog or store
Sears may recommend other accessories not listed in
this manual.,
See your nearest Sears Hardware Department or Sears
Power and Hand Tool Catalog for other accessories,,
Do not use any accessory unless you have completely
read the Owner's Manual for that accessory.,
Use only accessories recommended for this Bench
Grinder_ Using other accessories may cause serious
injury and cause damage to the Bench Grinder.
UNPACKING AND CHECKING
CONTENTS
(Fig. C)
This Bench Grinder will require a minimal amount of
assembly° A 12mm x 10mm open end wrench is pro-
vided for mounting the Tool Rest Assemblies and the
Spark Arrestor Assemblies°
Remove ail of the parts from the shipping box and lay
them on a clean work surface,, Compare the items to
(Fig,, C), verify that all items are accounted for before
discarding the shipping box,.
Fig. C
A
To avoid serious injury, do not attempt to plug in the
power cord and turn "ON" the Bench Grinder if any
parts are missing. The Bench Grinder can only be
turned "ON" after all the parts have been obtained and
installed correctly.
The following items are to be provided in the
shipping box:
Am Grinder
B,. Hex Wrench 12ram x 'I0mm open end
C. Left Eyeshield assembly
Do Right Eyeshield assembly (not shown)
Eo Tool Rest assemblies (2)
C
B
Publicidad
