Publicidad
Idiomas disponibles
Idiomas disponibles
Thepurpose o fsafety symbols i stoattract y ourattention t o possible d angers.
Thesafety symbols a ndtheexplanations withthem deserve y ourcareful
attention a ndunderstanding.
Thesymbol warnings d onot,bythemselves,
eliminate a nydanger. Theinstructions andwarnings t hey givearenosubstitutes
forproper a ccident prevention measures.
WARNING: Besureto read andunderstand allsafety instructions inthis
manual, including a llsafety alert s ymbols s uchas"DANGER," "WARNING,"
and"CAUTION," before using thistool.Failure t o following a llinstructions listed
below may result i nelectric s hock, f ire,and/or s erious personal injury.
SYMBOL SIGNAL MEANING
SAFETY ALERT SYMBOL:
Indicates
DANGER, WARNING,
or CAUTION;
may
be used in conjunction
with other symbols
or pictographs.
DANGER:
Indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING:
Indicates a hazardous
situation
which, if not avoided,
could
result in death or serious injury.
CAUTION:
Indicates a hazardous
situation
which, if not avoided,
could
result in minor or moderate
injury.
Damage Prevention and Information Messages
These inform the user of important
information
and/or instructions
that could
lead to equipment
or other property
damage
if they are not followed.
Each
message
is preceded
by the word "NOTICE,"
as in the example
below:
NOTICE:
Equipment
and/or property
damage
may result if these instructions
are
not followed.
WARNING:
To ensure safety and reliability,
all repairs should
be performed
by a qualified
service technician.
_,
WARNING:The
operation
of any power tool can result in
foreign objects
being thrown
into your eyes, which can result
in severe eye damage.
Before beginning
power tool operation,
always wear safety goggles or safety glasses with side shields
and a full-face
shield when needed. We recommend
a Wide
Vision Safety Mask for use over eyeglasses
or standard
safety
glasses with side shields. Always use eye protection
which is
marked to comply with ANSI Z87.1
Publicidad
