Publicidad
Idiomas disponibles
Idiomas disponibles
This product will accept Craftsman
19.2V C3 lithium-ion
battery packs. For
complete
charging instructions,
refer to the Operator's
Manuals for the battery
pack and charger.
WARNING:
Do not direct the light beam at persons
or animals and do not
stare into the light beam yourself (even from a distance).
Staring into the light
beam may result in serious injury or vision loss.
TO ATTACH BATTERY PACK (Fig. 2)
1.
Ensure that the on/off switch
is in the "OFF" position.
2.
Align the raised rib on the
battery pack with the groove
inside the worklight,
and then
insert the battery pack into
the appliance.
NOTICE:
Make sure that the
latch on the battery
pack snaps
into place and the battery pack is
secured
to the appliance
before
beginning
operation.
Improper
assembly
of the battery pack can
cause damage to internal components.
Fig. 2
Rib
:h
3attery-
aase Button
TO DETACH
BATTERY
PACK (Fig. 2)
1.
2.
3.
TURN ON/OFF THE
WORKLIGHT
(Fig. 3)
With the worklight
facing you as
shown in Fig. 3:
Push the On/Off switch to the Left
to turn the worklight
ON.
Push the On/Off switch to the
Right to turn the worklight
OFF.
Ensure that the on/off switch is in the "OFF" position.
Depress both battery-release
buttons,
located on the sides of the battery
pack, to release the battery pack.
Pull the battery
pack out and remove it from the appliance.
On/off Switch
Fig. 3
Off
_
On
Publicidad
