Publicidad
Idiomas disponibles
Idiomas disponibles
1
NOTICE
A 110 V GFCI outlet is
required.
> Mark the holes to be
drilled for the anchors.
5
> Detach mirror front with
four screws.
9
> The top screw will adjust
closer and further, from
the mirror.
> The lower screw will
adjust up and down.
2
Ø ⅜"
> Use a 3/8" drill bit.
> Drill the anchor holes that
have been marked.
6
1
2
> Lift the mirror up and
slide the mirror backing.
10
> Mark the hole to be drilled
for the screw.
> Remove mirror backing.
3
2x
> The plastic anchors
provided are for concrete
wall applications.
7
> Lift the mirror backing
up and onto the mounting
brackets.
11
Ø ⅜"
> Use a 3/8" drill bit.
> Drill the anchor hole that
has been marked.
4
> Screw the bracket(s) to
the wall at the specified
location.
> For wood stud walls, bolts
should be screwed into
wood backing.
8
> Check the mirror backing
is leveled.
12
1x
> The plastic anchor
provided is for concrete
wall applications.
MAL_Starck_S19716/17.11.1
6
Publicidad
