Parkside PRM 1300 A1 Traduccion Del Manual De Instrucciones Originale página 56

GB MT
ment of one blade may result in
the rotation of the other blades.
• Use only spare parts and ac-
cessories supplied and recom-
mended by the manufacturer.
The use of non-original parts
will immediately invalidate the
guarantee.
• Avoid wearing loose clothing or
clothing with hanging cords or
belts.
• Worn or damaged information
signs must be replaced.
• Use only authorised power
cables of type H05RN-F, which
are no more than 75 m long
and suitable for outdoor use.
The power cable wire cross sec-
tion must be at least 2.5 mm
Always completely unroll cable
drums before use. Check the
cable for damage
• Switch off the equipment and dis-
connect the plug from the socket
if the power cable is damaged.
If the power cable is damaged,
it must be replaced by the manu-
facturer, the customer services of
the same, or a qualified person,
in order to avoid hazards.
• Do not connect a damaged
power cable to the mains. Do
not touch a damaged power
cable when it is connected to
the mains. A damaged power
cable may result in contact with
live parts.
• Prior to use, always check the
connecting cable and extension
cable for signs of damage or
wear and tear. If the cable gets
damaged during use, it must be
disconnected from the supply
network immediately.
56
DO NOT TOUCH THE CABLE
BEFORE IT HAS BEEN DIS-
CONNECTED. Do not use the
machine, if the cable is worn or
damaged.
CAUTION! The following
states how damage to the
appliance and possible inju-
ry to people can be avoided:
In this way you avoid dama-
ge to the appliance and pos-
sible injury to people.
Working with the Equipment:
Do not place feet or hands
near or under rotating parts
2 . when working. Risk of injury!
Observe the noise protection
and local regulations. The
use of the equipment may be
restricted or prohibited on
certain days (e.g. Sundays
and public holidays), at cer-
tain times of day (lunchtimes,
nighttimes) or in certain ar-
eas (e.g. health resorts, hos-
pitals etc.).
• Switch on the motor accord-
ing to the instructions and only
when your feet are at a safe
distance from the cutting tools.
• Do not use the equipment in
the rain, in poor weather, in a
damp environment, or on wet
grass. Work only in daylight or
with good lighting.
If possible, do not use the appli-
ance on wet grass.
• Do not work with the equipment
when tired, lacking concentra-