Joie i-Gemm 2 Manual De Instrucciones página 2

GB
Welcome to Joie
Congratulations on becoming part of the Joie family! We are so excited
to be part of your journey with your little one. While traveling with the
Joie i-Gemm™ 2 infant child restraint you are using a high quality, fully
certified safety i-Size infant child restraint. Please carefully read this
manual and follow each step to ensure a comfortable ride and best pro-
tection for your child.
To use this Joie infant child restraint with the i-Size ISOFIX connections
according to the ECE R129 Regulation, your child must meet the follow-
ing requirements.
Child height 40cm-85cm/ Child weight 13kg; (approximately 1.5 years
old or under).
Base
These instructions show the use of the infant carrier module and the
base. This base can also be used with other certain Joie infant carrier
module. Please read all the instructions in this manual before installing
and using the product.
! IMPORTANT: KEEP FOR FUTURE REFERENCE.
PLEASE READ CAREFULLY.
Please keep the instruction manual at the
bottom of the soft goods.
1
™
Emergency
In case of emergency or accidents, it is most important to have your
child taken care of with first aid and medical treatment immediately.
Product Information
"i-Size" (Integral Universal ISOFIX Child Restraint Systems) is a
category of Infant Child Restraint System for use in all i-Size seating
position of a vehicle.
Not all vehicle manufacture's handbooks list i-Size compatibility yet.
This seat and base is also approved for use in ISOFIX compatible
vehicles. Please refer to the vehicle manufacturer's website or consult
your dealer.
1. According to the ECE R129 Regulation, the infant carrier module
with Base is a Universal ISOFIX Class C, D infant child restraint and
should be fitted using the ISOFIX connections.
2. This is an "i-Size" infant child restraint System. It is approved to
Regulation ECE R129, for use in, "i-Size compatible" vehicle
seating positions as indicated by vehicle manufacturers in
the vehicle users' manual.
3. If in doubt, please consult the infant child restraint manufacturer or
the retailer. This is an i-Size ISOFIX CHILD RESTRAINT SYSTEM.
It is approved to ECE R129 series of amendments, not all vehicle
manufacture's handbooks list i-Size compatibility yet. This seat and
base is also approved for use in ISOFIX compatible vehicles. Please
refer to the vehicle manufacturer's website or consult your dealer.
It will fit vehicles with positions approved as i-Size ISOFIX positions (as
detailed in the vehicle handbook), depending on the category of the
infant child restraint and of the fixture.
2