Publicidad
Idiomas disponibles
Idiomas disponibles
4" & 3" MPOWER
FASCIA LIGHTS
®
ELECTRICAL INSTRUCTIONS:
OVER-VOLTAGE PROTECTION
When an over-voltage condition is detected, the module will
flash an over-voltage warning pattern of 50mS ON/950mS
OFF to alert of the over-voltage condition and protect the
electronics from damage due to heat/voltage.
THERMAL COMPENSATION PROTECTION
The LED module is designed to provide maximum power
output while providing protection to the electronic compo-
nents by reducing the output power at extreme tempera-
tures.
SYNC 2
Synchronizing the flashing of multiple light modules is ac-
complished by connecting the Green wires of different light
modules together. Up to 24 light modules can be connected
for synchronized flashing. All light module flash patterns
must be set to the same flash pattern # to ensure proper op-
eration. Refer to the Sequence Type section in Set-Up Table
(page 11) to setup light modules to flash in alternate or
simultaneous flash pattern. NOTE: Will NOT work with non-
Sync 2 products such as Ghost, LED3, and 4 wire Intersector.
WILL WORK with Sync 2 products nFORCE Secondary Lights,
nFORCE FIT and 5 wire Intersector Lights.
9
1.800.338.7337 / www.soundoffsignal.com
PATTERN #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
NOTES:
FLASH PATTERNS
SINGLE
DUAL COLOR
COLOR
QUINT
WARP
INTER-CYCLE
DOUBLE
QUAD
POWER PULSE
ROAD RUNNER
Q-SWITCH
STEADY-BURN / ROADRUNNER
(SEQUENCE TYPE 1: STEADY BURN,
SEQUENCE TYPE 2: ROADRUNNER)
STEADY-BURN DRIVER TITLE 13 QUAD
(SEQUENCE TYPE 1: STEADY BURN,
SEQUENCE TYPE 2: TITLE 13 QUAD)
QUAD 2
DOUBLE 2
RANDOM 1
RANDOM 2
4" & 3" MPOWER
ENGLISH 0000JL 1123 REV C
TRI-COLOR
FASCIA LIGHTS
®
Publicidad
