Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION OF THE DEVICES
Compact spot with 36 high-power LEDs
• Manual, sound or DMX-controlled operation
• Functions: 7 static colors; automatic sound-controlled color change; strobe and flash effect with variable
speed; Master/Slave
• Color-change speed adjustable via dip switches
• Strobe-effect, Multi-color and color-changes with adjustable speed
• Sound-controlled via built-in microphone
• Fuzzy-Sound-Control: program continues automatically during periods without music or bass-beat
• Locking possibility at the mounting bracket
• DMX-512 control via regular DMX-controller (occupies 5 channels)
• Delivery including power cable
• 1, 5, 10 m power link cable available
• After every 16 spots, the fixtures must have a renewed connection with the power mains
• Advantages of LED-technology: extremely long life, low power consumption, minimal heat emission,
defacto maintenance free with brilliant light radiation
INSTALLATION
Up to a maximum of 16 devices can be connected in series.
th
The 17
unit must have a renewed connection with the power mains
due to the earth conductor.
Overhead rigging
The installation of the projector has to be built and constructed in a way that it can hold 10 times the weight
for 1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
Procedure:
The projector should be installed outside areas where persons may walk by or be seated.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to)
calculating working load limits, installation material being used, and periodic safety inspection of all
installation material and the projector. If you lack these qualifications, do not attempt the installation yourself,
18/45
00028638.DOC, Version 2.0
Publicidad
