Alarm Output; Warning - Abus TVVR36000 Manual De Instrucciones

Ocultar thumbs Ver también para TVVR36000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 304
Configuration
Parameter
Full-screen pop-up
Audible Warning
Notify CMS
Send email
Trigger alarm output
Confirm the settings by clicking Apply and exit the
menu with OK.

Alarm output

Note
This menu item is only available if a compatible
camera with alarm output is connected e.g.
TVIP11560.
Select a reaction in the event of an alarm by clicking
the 'Setting' symbol for "Reaction".
Parameter
Setting
Alarm out-
Select the alarm output to make the set-
put
tings. You can select the alarm output us-
ing the network address data.
Alarm Name Enter a clear description here (e.g. door
contact on warehouse)
Dwell Time
Select the dwell time for switching the
alarm output.
Activate the alarm input by ticking the box for "Set-
tings".
Define the response of the recorder when there is an
alarm at "Settings".
Click Copy to apply these settings for other cameras.
Notifications
The camera is displayed as
a full-screen picture in live
cast
The device emits a repeat-
ing tone.
The CMS emits an audible
warning tone.
An email is sent to a specific
email address. See page 29
The alarm output is triggered
in the event of an alarm.
Confirm the settings by clicking Apply and exit the
menu with Back.
Settings
Activating the time plan
Set the time at which the alarm output should be acti-
vated.

Warning

You can trigger a warning for the following error types:
HDD Full
HDD Error
Network Disconnected
IP Conflict
Illegal Login
Exception Error
Parameter
Audible Warning
Notify CMS
Send email
Notifications
The device emits a repeating
tone.
A message is sent to the
event log of the CMS soft-
ware.
An email is sent to a specific
email address.
94

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido