Camera
Handling
Trigger Channel
When "Reaction" is clicked, the TAB Trigger channel
appears (only with motion recognition):
Select one or more camera channels that should carry
out a reaction in the event of an alarm.
Confirm the settings by clicking Apply and leave the
menu with OK.
Armin Schedule
Select the TAB Arming Schedule.
Here you set the times when the reactions in the TAB
Reaction are triggered.
1.
Select the day and enter the schedule.
2.
Select whether the settings should be applied to all
days of the week with using Copy.
3.
Confirm the settings by clicking Apply and leave the
menu with OK.
Handling
Select the TAB Reaction.
Here you can configure the response of the recorder for
an alarm by ticking a box.
Parameter
Full-screen pop-up
Audible Warning
Notify CMS
Send email
Trigger alarm output
Confirm the settings by clicking Apply and leave the
menu with OK
Private Zone
Select the camera channel under "Camera".
Select the checkbox for activating the private zone.
1.
Select up to four private zones with the mouse.
Note
You can define up to 8 time periods (each from
00:00 to 00:00). The times in the individual peri-
ods must not overlap.
2.
Select Copy if the setting is to be applied for all
cameras.
Notifications
The camera is displayed as
a full-screen picture in live
cast
The device emits a repeat-
ing tone.
The CMS emits an audible
warning tone.
An email is sent to a specific
email address. See page 29
The alarm output is triggered
in the event of an alarm.
98