My Arcade GO GAMER PORTABLE Guía De Usuario página 6

"OFF" to "ON" to turn on the system or move switch to the
to illuminate the device LEDs.
7
.
The main screen will display on the television.
NOTES:
Check your television user guide for instruction for inputs.
The volume buttons only control the volume of the
Go Gamer. Television volume should be adjusted separately.
Troubleshooting
Issue:
My Go Gamer doesn't turn on.
Solution:
Make sure that you have new batteries installed
properly and securely in your Go Gamer.
Issue:
The games won't show up on my television screen.
Solution:
Make sure of the following:
The AV cable is not damaged and contacts on both ends are
not damaged or compromised.
The AV cable is properly and securely plugged into the TV.
The TV is on the proper input (the input should match the
setting on where the plugs are plugged into. Refer to your
television's user guide for Instruction for inputs).
The AV cable and the TV ports are free from dust and debris.
Issue: I
have my headphones plugged in but cannot
hear anything.
Solution:
Make sure of the following:
Make sure you are plugged into the AUX OUT port on the
bottom of the Go Gamer.
Make sure the volume of your Go Gamer and headset is
turned up.