Publicidad
Idiomas disponibles
Idiomas disponibles
ceiling fan to concrete ceilings or joists, use a drill for making the holes and plugs or
expansion screws (not included).
8.
Remove the screws located on the lower part of the motor through the lamp
support.
9.
Screw the blade brackets to the motor through the hole in the lamp support
paying attention to the warning sticker located on one of the blade brackets.
10. Screw the blades to the blade brackets using the screws, washers, and nuts
provided. Because blades are reversible, choose the side you wish to be visible
and screw them in such way that the nuts are located on the top part of the
blade.
11.
Once the installation bracket is screwed, connect the wiring. First connect the
quick-connect cable to the terminal block on the installation bracket. Follow the
colour code. From the opposite end of the terminal block, connect the wiring
from the installation of your home.
12.
Lift the fan previously mounted to the installation bracket and insert the hanging
ball through the installation-bracket hole.
13.
Connect the cables that come out from the downrod to those from the
installation bracket using both quick connectors.
14. Slide the canopy upwards so that all the connections are stored inside it and
screw it to the installation bracket using the 4 screws (2 to each side) removed at
the beginning of the installation process.
15.
Tighten the bulb to the lamp holder (not included).
16.
Fit the lamp into the appliance lower part by inserting the lamp support tabs
inside the lamp to securely fix it.
17.
Attach the chain. To do so, fix the long chains with the corresponding end parts
of the fan chains by introducing the long chain end into the connecting piece.
18.
Make sure that the chains are safely fixed by pulling on them carefully from the
connecting piece.
Please note
The reversible blades have 2 different high-quality finishes.
By inverting the blades, the appliance produces a decorative effect and adapts to
different room designs.
4. OPERATION
Switching the fan on or off:
-
When it is turned off (OFF position), pull from the switch chain until the fan turns
on. To turn it off, pull from the chain again.
ENGLISH
33
V415 STEEL
Publicidad
