Publicidad
Idiomas disponibles
Idiomas disponibles
Important safeguards
ao
F 2 WN
6A. An appliance and cart
10.
11.
12.
13.
14.
15.
16.
17.
Read Instructions — All the safety and operating instructions
should be read before the appliance is operated.
Retain Instructions — The safety and operating instructions
should be retained for future reference.
Heed Warnings — All warnings on the appliance and in the
operating instructions should be adhered to.
Follow Instructions — All operating and use instructions
should be followed.
Waiter and Moisture — The appliance should not be used
near water — for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool, and the like.
Carts and Stands — The appliance should be used only with
a cart or stand that is recommended by the manufacturer.
PORTABLE CART WARNING
$3125A
inrs
a
Wall or Ceiling Mounting — The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
Ventilation — The appliance should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface that may block
the ventilation openings; or, if placed in a built-in installation,
such as a bookcase or cabinet that may impede the flow of
air through the ventilation openings, there should be free
space of at least 20 cm and open up behind the appliance.
Heat — The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
Power Sources — The appliance should be connected to a
power supply only of the type described in the operating
instructions or as marked on the appliance.
Polarization — If the appliance is provided with a polarized
plug having one blade wider than the other, please read the
following information: The polarization of the plug is a safety
feature. The polarized plug will only fit the outlet one way. If
the plug does not fit fully into the outlet, try reversing it. If
there is still trouble inserting it, the user should seek the
services of a qualified electrician. Under no circumstances
should the user attempt to defeat the polarization of the plug.
Power-Cord Protection — Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, especially near plugs,
convenience receptacles, and the point where they exit from
the appliance.
Cleaning — The appliance should be cleaned only as
recommended by the manufacturer.
Nonuse Periods — The power cord of the appliance should
be unplugged from the outlet when left unused for a long
period of time.
Object and Liquid Entry — Care should be taken so that
objects do not fall and liquids are not spilled into the
enclosure through openings.
Damage Requiring Service — The appliance should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the
appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
Servicing — The user should not attempt to service the
appliance beyond that described in the operating
instructions. All other servicing should be referred to qualified
service personnel.
combination should be moved
with care. Quick stops,
excessive force, and uneven
surfaces many cause the
appliance and cart
combination to overturn.
Precautions
1.
wo
Warranty card
You can find the serial number on the rear panel. In
case of warranty claim, please report this number.
Recording Copyright
Recording of copyrighted material for other than
personal use is illegal without permission of the
copyright holder.
AC Fuse
The fuse is located inside the chassis and is not user-
servicable.
|f power does not come on, contact your Onkyo
authorized service station.
Care
From time to time you should wipe off the front and
rear panels and the cabinet with a soft cloth. For
heavier dirt, dampen a soft cloth in a weak solution of
mild detergent and water, wring it out dry, and wipe off
the dirt. Following this, dry immediately with a clean
cloth. Do not use rough material, thinners, alcohol or
other chemical solvents or cloths since these may
damage the finish or remove the panel lettering.
Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST
TIME, READ THE FOLLOWING SECTION
CAREFULLY.
¢ The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit will
be used meets the required voltage (e.g., AC230V
50Hz or AC120V 60Hz) written on the rear panel.
¢ Models Equipped with a Voltage Selector
Worldwide models are equipped with a voltage
selector to conform to local power supplies. Be sure
to set this switch to match the voltage of the power
supply in your area before plugging in the unit.
Setting the voitage selector
SKW-320
SKW-310
VOLTAGE
220-230V
SELECTOR
120V
Setting the voltage selector
1. Determine the proper voltage for your
area: 220-230V or 120V.
2. If the preset voltage is not proper for
your area, insert a screwdriver into the
groove in the switch. Slide the switch
all the way to the lower (120V) or to
the upper (220-230V) whichever is
proper.
Publicidad
