Publicidad
Idiomas disponibles
Idiomas disponibles
——
AIR SUPPLY
à
VE Peay
OG
s
'using 1/2" (1.D.) fittings with 1/2"
|
commended,
For proper perfor-
ig
|
bere
|
Weegee
i |
mance and more convenience, use a 1/2" I.D. hose.
To remove nuts, set the regulator to the maximum -
-Hoses longer than 50 feet should have a 1" 1.D.
«setting. To install nuts, set the regulator to the minimum
ito med
setting. Do not overtighten the nuts.
A WARNING
A
NEVER CARRY A TOOL BY THE HOSE OR PULL
THE HOSE TO MOVE THE TOOL OR A COMPRES-
SOR. KEEP HOSES AWAY FROM HEAT, OIL AND
SHARP
EDGES.
REPLACE
ANY
HOSE
THAT
IS
DAMAGED, WEAK OR WORN.
IÀ
mm
d
sas
ended air hose hook-up.
STORAGE
The impact wrench must be lubricated before storing.
Follow the air motor lubrication instructions with an
exception to step 4. Only run the impact wrench for 2 to
3 seconds instead of 20 to 30 seconds because more oil
needs to remain in the impact wrench when storing.
EXTENDED
ANVIL
WEIGHT
6 1b-3 oz
11 Ib
6 !b-5 oz
28 ib
1/2" Sq
3/4" Sq
1/2" Sq
1° Sq
Publicidad
