Beurer BY 90 Instrucciones De Uso página 20

9. This baby scale has a 'HOLD' function (AUTO HOLD and MECHANICAL HOLD). The
AUTO HOLD function (which is activated as standard) establishes the baby's weight
on the display as soon as they are still enough to achieve an exact measured value. If
the baby is moving around vigorously, their weight cannot be recorded. Therefore, try
to calm the wriggling baby to achieve a rapid measurement, but do not touch the
baby, as this will affect the weight measurement. As soon as the baby's weight is
established on the display, the word 'HOLD' stops flashing and the weight is displayed
for 120 seconds.
Note: If the weight cannot be determined automatically after 8 seconds, the baby
scale averages the weight over 4 seconds (flashing display of the weight on the
baby scale display).
10. The weight is saved on the baby scale and it switches off automatically after 120 se-
conds. To switch off the scale manually, press and hold the ON/OFF/TARE button
for 3 seconds.
11. If the baby is wriggling about too vigorously, you can select the MECHANICAL HOLD
function by pressing the HOLD button. After 5 seconds, the word 'HOLD' stops flas-
hing and the averaged weight is displayed for 120 seconds.
12. To transfer the measured weight to the app, open the app and press the Bluetooth®
button after the measurement has successfully been taken.
13. The baby scale automatically switches off once the transfer has been completed suc-
cessfully.
Initial use without the app
We recommend using the "beurer BabyCare" app for the initial use and implementing all
settings (see "Initial use with the app" section).
Note: Measurements that are saved on the baby scale without it having been previ-
ously synchronised with the app cannot be transferred.
1. Place the baby scale on an even, hard surface; a hard surface is crucial for correct mea-
surement.
2. Press the ON/OFF/TARE button
display for 120 seconds. Press any button to use the baby scale without the app.
3. As soon as "0,000 kg" appears on the display, the baby scale is ready to take measure-
ments.
4. Now place the baby on the weighing surface. Do this very carefully; do not let the baby
fall and take particular care with the baby's head.
5. The weight is displayed for 120 seconds and then it switches off automatically. Press
the ON/OFF/TARE button
nually, press and hold the ON/OFF/TARE button
Subsequent synchronisation with the app
If you have not synchronised the baby scale with the "beurer BabyCare" app during initial
use, you can also do this later.
1. Press the ON/OFF/TARE button
2. "App" flashes on the display of the baby scale for 10 seconds. If the app is open, the
baby scale can be connected for 10 seconds.
Alternatively:
to switch on the baby scale. "app" flashes on the
to take another measurement. To switch off the scale ma-
to switch on the baby scale.
20
for 3 seconds.