Using the SmartThings connect feature
The cooktop has built in a Wi-Fi module that you can use to sync the cooktop with
the SmartThings app. On the smartphone app, you can:
•
monitor the operating status and the power level settings of the cooktop
elements.
•
check and change the timer settings.
Functions that can be operated from the SmartThings app may not work smoothly
if communication conditions are poor or the product is installed in a place with a
weak Wi-Fi signal.
How to connect the cooktop
Before you can use the remote features of your Samsung cooktop, you must pair it
to the SmartThings app.
Download and open the SmartThings app on your smart device.
1.
2.
Press the Power (
) key to turn the cooktop on.
3.
Follow the app's instructions, and then touch and hold the Pause key for
3 seconds.
While the connection is being made,
4.
complete, the Wi-Fi
indicator will be on. Now the cooktop is connected
successfully.
5.
If the Wi-Fi indicator does not turn on, follow the instruction in the app to
reconnect.
NOTE
•
Make sure to set the Wi-Fi function only when no cooktop operation is in
process.
•
For further instructions, refer to the web manual at www.samsung.com
•
It cannot be set if there is residual heat.
Wi-Fi On/Off
•
Touch and hold the Pause key over 3 seconds to turn on or turn off the Wi-Fi
connection when Child lock is on.
is blinking. Once the process is
Maintaining your appliance
Care and cleaning of the glass cooktop
Normal daily use cleaning
Use only a ceramic cooktop cleaner. Other creams may not be as effective.
By following these steps, you can maintain and protect the surface of your glass
cooktop.
1.
Before using the cooktop for the first time, clean it with a ceramic cooktop
cleaner.
•
This helps protect the top and makes cleanup easier.
•
Daily use of a ceramic cooktop cleaner will help keep the cooktop looking
new.
2.
Shake the cleaning cream well. Apply a few drops of cleaner directly to the
cooktop.
3.
Use a paper towel or a cleaning pad for ceramic cooktops to clean the entire
cooktop surface.
4.
Use a dry cloth or paper towel to remove all cleaning residue. No need to
rinse.
WARNING
DAMAGE to your glass surface may occur if you use scrub pads other than those
recommended.
English 27