Publicidad
Idiomas disponibles
Idiomas disponibles
It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility of the device owner
to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost or not legible, contact SUNEX for
replacements. If the operator is not fluent in English, the product and safety instructions shall be read and discussed with the operator in the operator's
native language by the purchaser/owner or the designer, making sure that the operator comprehends its contents.
THIS
INSTRUCTION
CONTAINS IMPORTANT SAFETY
INFORMATION.
READ
THIS
INSTRUCTION
CAREFULLY
AND
UNDERSTAND
INFORMATION BEFORE OPERATING THIS
TOOL.
• Read and understand all instructions. Failure
to follow all instructions listed below, may
result in electric shock, fire, explosion and/or
serious personal injury. It is the responsibility
of the owner to make sure all personnel read
this manual prior to using the device. It is also
the responsibility of the device owner to keep
this manual intact and in a convenient location
for all to see and read. If the manual or product
labels are lost or not legible, contact SUNEX
for replacements. If the operator is not fluent
in English, the product and safety instructions
shall be read and discussed with the operator
in the operator's native language by the
purchaser/owner or his designee, making sure
that the operator comprehends its contents.
• Always operate, inspect and maintain
this tool in accordance with American
National Standards Institute Safety Code of
Portable Air Tools (ANSI B186.1) and any
other
applicable
safety
regulations.
• For safety, top performance
and maximum
parts, operate this tool at 90 psig;
6.2 bar max air pressure with 3/8" diameter
air supply hose.
• To reduce exposure to sanding
debris, work in a well ventilated
area with proper personal
protection equipment.
• Always wear safety goggles, ear
protection and breathing apparatus
(users & bystanders)
• Blow guns can create flying
articles, noise & pressure which
can cause injury.
• Keep the tool in efficient operating
condition.
• Operators and maintenance personnel
must be physically able to handle the bulk,
weight and power of this tool.
• Air under pressure can cause
severe injury. Never direct air
at yourself or others. Always
turn off the air supply, drain
hose
of
air
detach tool from air supply
before
installing,
or
adjusting
on this tool, or before performing
any maintenance on this tool.
Failure to do so could result in injury. Whip
hoses can cause serious injury. Always
check for damaged, frayed or loose hoses
and fittings, and replace immediately. Do
not use quick detach couplings at tool. See
instructions for correct set-up.
SXSN6P01: Parts Breakdown & Operating Manual
WARNING!
MANUAL
MANUAL
ALL
periods of time may be harmful to your hands
and arms. Discontinue use of tool if discomfort,
tingling feeling o pain occurs. Seek medical
advice before resuming use.
death. Be aware of excess hose left on the walking
or work surface.
• Keep body working stance balanced and
firm. Do not overreach when operating the
tool.
• Do not point or indulge in any horseplay with
this tool.
• Anticipate and be alert for sudden changes in
motion during start up and operation of any
power tool.
codes
and
durability of
• Do not use (or modify) the tool for any other
purpose than that for which it was designed
without
authorized representative.
• Use only a sanding pad & sandpaper with this
tool. Do not use any grinding wheel, burr or metal
removing accessory with this tool.
RPM
RPM
RPM
RPM
RPM
explosive atmospheres.
pressure
and
• Servicing and repairs should only be made
by an authorized service center.
removing
any
accessory
• Do not force tool beyond its rated capacity.
can occur if hair is not kept away from tool and
accessories. Choking can occur if neckwear is
not kept away from tool and accessories.
• DON'T OVEREACH.
and balance at all times.
WARNING
• Keep tool out of reach of children.
• Air powered tools can vibrate
in use. Vibration, repetitive motions or
uncomfortable positions over extended
• Slipping,
tripping
or falling while operating air tools can
be a major cause of serious injury or
• Do not carry tool by the hose
Protect the hose from sharp objects
and heat.
• Note direction of rotation BEFORE
operating this tool.
• Tool shaft may continue to rotate
briefly after throttle is released. Avoid
direct contact with accessories during
and after use. Gloves will reduce the
risk of cuts or burns.
consulting
the
manufacturer's
• Ensure the MAX rating (RPM) of the
sanding accessories is higher than the
tools rated RPM.
• Use accessories recommended by
SUNEX Tools.
• Do
not
lu bri cate
tools
flam ma ble or vol a tile liq uids such
as ker o sene, die sel or jet fuel.
• This tool is not insulated against
electric shock.
• This tool must not be used in
• Keep away from rotating end of
tool. Do not wear jewelry or loose
clothing. Secure long hair. Scalping
Keep proper footing
2
• Sanding against sharp corners may
damage the pad, rendering it useless.
• Do not remove any labels. Replace
damaged labels.
• Failure to heed these warnings may reusult
in personal injury and/or property damage.
Do not lock, tape or wire the "on/off" safety
lever in the "on" position, as the lever must
and
be free to return to the "off" position when
released.
WARNING:
expose you to chemicals including
nickel which is known to the State of
California to cause cancer and birth defects or
other reproductive harm. For more information
go to www.P65Warnings.ca.gov.
with
This
product
can
1/3/23
Publicidad
