Mastech PN000753 Instrucciones De Montaje página 4

Skid Plate / Engine Guard Mounting Instructions
Included Items:
Hex Bolt Hex Bolt
M10 X 240 P 1.25 With M8 X 25 P 1.25 with
M10 P 1.25 Nut. M8 Flange Nut.
"TC1"
Quan�ty 3
Quan�ty 2
Imagen 6
Imagen 7
Imagen 8
After the installation make sure the parts are aligned and all hardware is properly tightened; readjust all the screws.
"TC2"
Hex Screw
M8 X 80
"TC2" "TC3"
8
Quan�ty
"TC1"
"PLA D"
Do not tighten all the screws until the drill holes are completely
aligned with all the xing points.
Start by installing the "Pla D" and "Pla C" together with the TC1 and Bushings
A and B, as illustrated in the scheme above, and the images 6 and 7.
Proceed Installing the "Pla A" and "B Pla" together with the TC2, as illustrated
in the scheme above, and the image 8.
Lastly assemble the Skid Plate by locating it on the lower fasteners of the 4
Plates using the TC3 and a hex wrench, it is recommended to use a bench or
any other element that holds the Skid Plate while tightening.
Cll 76 # 52 D - 74 - Telefax (4) 448 84 28 - Medellín - Colombia
KAWASAKI VERSYS 650 2015
"TC2"
"PLA B"
"BUJ B"
www.mastechno.com
"TC2"
"PLA A"
"TC1"
"BUJ A"
"PLA C"