Publicidad
Idiomas disponibles
Idiomas disponibles
• After you have finished work, turn
the power tool off and do not pull
the sawblade out of the cut until it
has come to a standstill. In this way
you will avoid any kickback and can safely
put down the power tool.
• Use only undamaged sawblades in
perfect condition. Bent or blunt blades
can break, adversely affect the cut or cause
kickback.
• Do not brake the sawblade after
switching the device off by apply-
ing side pressure. The saw blade may
be damaged, break or cause a kickback.
• Use suitable detectors to determ-
ine if there are hidden supply lines
or contact the local utility company
for assistance. Contact with electric
cables can cause fire and electric shock.
Damaging gas lines can lead to explosion.
Breaking water pipes causes property dam-
age.
• Always wait until the power tool
has come to a complete stop be-
fore placing it down. The application
tool can jam and cause you to lose control
of the power tool.
Residual risks
There will always be residual risks even if you
operate this power tool according to the in-
structions. The following hazards may occur
in connection with the type and design of this
power tool:
• Hearing damage if suitable ear protection
is not worn.
• Health injuries resulting from the effect of vi-
bration on the hands and arms in the event
that the device is used over a longer period
of time or is not used and maintained prop-
erly.
• Cutting injuries
WARNING! Danger due to electromag-
netic field generated while the machine is in
operation. Under certain circumstances, this
field may negatively affect active or pass-
ive medical implants. In order to reduce the
danger of serious or fatal injuries, we recom-
mend that individuals who wear medical im-
plants should consult their doctor and the man-
ufacturer of the implant before operating the
machine.
Preparation
WARNING! Risk of injury due to uninten-
tional start-up. Only insert the rechargeable
battery into the device once the device is fully
prepared for use.
Control elements
Familiarise yourself with the operating elements
before using the device for the first time.
• Unlock button (3)
• Unlocking: Press
✔ The LED work lights light up
If no further action follows, the LED work
lights go out automatically after 10 s
(or after the delay set in the app). The
device is locked again.
• Locking: Press
✔ The LED work lights go out
• On/Off switch (2)
The device will only switch on when the LED
work lights are lit up.
• Switching on: Press
• Switching off: Press
• Pendulum stroke switch (12)
Set pendulum movement of the saw blade
in 4 positions:
• 0 - no pendulum motion
• 1 - small pendulum motion
• 2 - medium pendulum motion
• 3 - large pendulum motion
• Rotary wheel (1)
Set stroke rate in 7 levels:
• 1 lowest stroke rate
• 6 highest stroke rate
• A automatic stroke rate adapted to the
load
GB
MT
27
Publicidad
