!
WARNING
LASER RADIATION. AVOID
DIRECT EYE EXPOSURE.
DO NOT stare into the laser
light source. Never aim light
at another person or object
other than the workpiece.
Laser light can damage
your eyes.
Read
all
instructions.
Failure
to
follow
instructions listed below may result in electric shock, fire and/or
serious injury.
Do not direct the laser beam at persons or animals
and do not stare into the laser beam yourself. This tool
produces laser class 2 laser radiation and complies with 21
CFR 1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007. This can lead to persons
being blinded.
Safety Rules for Rangefinder
Working
!
WARNING
safely with
the rangefinder is possible
only when the operating
and safety information are
read completely and the
instructions contained therin
are strictly followed. Never
make warning labels on the
Rangefinder unrecognizable.
Never aim the beam at a
workpiece with a reflective
surface. Bright shiny reflective
sheet steel or similar reflective
surfaces are not recommended
for laser use. Reflective
surfaces could direct the beam
back toward the operator.
General Safety Rules
all
Take care to recognize the
accuracy and range of the
device. Measurement may not
be accurate if used beyond the
rated range of the device.
Use of controls or adjustments
or performance of procedures
other than those specified
herein may result in hazardous
radiation exposure.
The use of optical instruments
with this product will increase
eye hazards.
Have the rangefinder repaired
only through qualified
specialist using original spare
parts. This ensures that the
safety of the rangefinder
-5-