General Safety Rules - Bosch GLL40-20G Instrucciones De Funcionamiento Y Seguridad

hazardous radiation exposure, electric shock, fire and/or serious
injury. The term "tool" in all of the warnings listed below refers to your
mains-operated (corded) tool or battery-operated (cordless) tool.
where the laser light is
emitted by the tool. ALWAYS
BE AWARE of their location
when using the tool.
pursuant to Laser Notice No. 50, dated June 24, 2007. This can lead
to persons being blinded.
DO NOT remove or deface any warning or caution labels.
Removing labels increases the risk of exposure to laser radiation.
Use of controls or adjustments or performance of procedures
other than those specified in this manual, may result in hazardous
radiation exposure.
ALWAYS make sure that any bystanders in the vicinity of use
are made aware of the dangers of looking directly into the laser
tool.
DO NOT place the laser tool in a position that may cause
anyone to stare into the laser beam intentionally or
unintentionally. Serious eye injury could result.
GLL40-20G 2610039425 7-18.indd 6

General Safety Rules

Read all instructions. Failure to follow all
instructions listed below may result in
The following labels are on your laser tool for
your convenience and safety. They indicate
Do not direct the laser beam at persons or animals
and do not stare into the laser beam yourself. This
tool produces laser class 2 laser radiation and complies
with 21 CFR 1040.10 and 1040.11 except for deviations
<5 mW @ 500-540 nm
-6-
12/31/18 9:26 PM