FIRST AUSTRIA FA-1920-BA Manual De Instrucciones página 2

BLUETOOTH STEREO SPEAKER
please read the user manual carefully before operating the unit
WARM WARNINGS
Welcome to use our company's products. In order to use this player correctly and
conveniently, you are advised to read this user manual carefully first. And this user
manual will lead you to more joyful function discovery.
NOTICES BEFORE USE
• Never use DC power over 5V as to avoid the damage of this player. Don't listen to
this player with the biggest volume for long time as to avoid the damage of your
ear.
• Avoid the disturb from any strong magnetic field or electric wave.
Avoid the following conditions:
• too high and too low temperature.
• direct sunshine
• humid, water drop, oil, chemical liquid, insecticide
• suddenly moved from cold to warm area, should wait the player becomes as warm
as the room temperature as to avoid malfunction.
• Never to put any liquid container like flower vase on top of the player.
SPECIFITIONS
poWEr: dc 5V
output iMpEdancE: spEakEr 4 ohMs + 4ohMs
output : 1.8Wx2 (rMs) (iMpEdancE 4 ohMs)
BluEtooth : EFFEctiVE rangE 8M
BattErY: dc 3.7V (3.7V 1000mah li-ion battery one piece)
charging tiME: 3-5 hours
diMEnsion: 240 (l) x 80 (W) x 88 (h) mm
WEight: aBout 0.46kg
NAMES OF PARTS
(see fig. 1)
1. Built-in spEakErs
2. prEVious/VoluME- Button
3. nEXt/VoluME+ Button
4. plaY/pausE/hand FrEE Button
5. BluEtooth indicator light
6. chargE indicator light
ACCESSORIES
• instruction Manual 1pc
• WarrantY Book 1pc
• usB caBlE 1pc
• auX input caBlE 1pc
thE spEciFicitY is suBJEct to changE Without FurthEr noticE.
OPERATIONS
POWER
When to change battery or when to charge battery:
When the sound volume is becoming less or distortion, power light becomes faint.
Battery charging:
the machine has one usB cable which can be used to charge the unit. When the
Battery is no power, insert the usB cable into the host computer usB interface, and
insert the other end interface into the local dc jack, just begin charging. also can use
2
7. rEcharging dc 5V Jack
8. auX input Jack
9. poWEr on/oFF
10. BattErY door
11. Mic
ac/dc adaptor (not included) to charge this player, but the input power should over
5.5V and no less than 1000ma, otherwise this unit will be damaged.
*** the battery built-in this player can be taken off to charge by cell phone charger. if
this player is not going to be used for a long time, please take the battery off and put
to store in dry cold place, otherwise the battery's capacity will become smaller and
smaller. charge the unit as soon as it is out of power in order to save the life of the
battery inside.
ON/OFF
Push the power ON/OFF switch to the position „ON", just connect to power, then can
operate; push the power ON/OFF switch to the „OFF" position, just power off.
AUX INPUT JACK
This unit can be an amplifier for any audio output device (cell phone, cassette player,
cd player, radio receiver, etc). the method is to use the line-in cord to connect the
audio out put device to this player turn on the unit. then it is ok.
in auX-in mode, you cannot adjust the volume through the unit directly.
BLUETOOTH
1. turn on the unit without line-in cord. When the bluetooth devices are on for
matching, the bluetooth indicator light will twinkle fast.
2. Open the bluetooth searching device of the mobile phone, when finding this
device, and input the password „0000", the bluetooth indicator light will be on after
matching successfully.
3. now can play the music of the mobile phone through this unit
4. handsfree function: can take the phone through this device when press the play
button of this unit, press it again to end the phone call or long press to refuse the
call.
5. When playing the music, press „PREVIOUS/VOLUME-" Button, then go back to
the previous song of the mobile phone bluetooth player, press nEXt/VoluME+
button, then skip to the next song.
6. at the status of this music playing, keep pressing prEVious/VoluME-
button,then can reduce the volume accordingly, and keep pressing nEXt/
VoluME+ button, then can increase the volume accordingly.
7. When playing then music through the bluetooth, press the plaY/pausE button,
just pause the playing, press again and just continue to play; if you want to match
new devices, long press "PLAY/PAUSE„ to enter matching mode and the bluetooth
indicator will twinkle fast
REMARK:
1. re-pairing:
during playback, long press the play/pause key, the machine will be returns to the
pairing state, the bluetooth indicator light (5) flash fast.
2. clear functions:
Under pairing state, the bluetooth indicator light (5) flash fast,at this moment please
press and hold the play/pause button (4) and the next song/volume + (3) button
together, and then all the paired memory of the machine will be clean up.
NOTE: Within 5 minutes after the bluetooth function of this unit is on, if no matching
devices is found, then the unit will power off automatically. the procedure for matching
bluetooth devices may be vary for different products.
For specific instruction, please refer to the product's manual
CAUTION
• the apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
• Minimum distances 5cm around the apparatus for sufficient ventilation.
3